MAINTENANCE SCHEDULE
Check Brake Operation
Check Tire Pressure
Check Operator Presence and ROS Systems
T
Check for Loose Fasteners
R
Check/Replace Mower Blades
A
Lubrication Chart
C
T
Check Battery Level
O
Clean Battery and Terminals
R
Clean Debris off Steering Plate
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level
Change Engine Oil (models with oil filter)
Change Engine Oil (models without oil filter)
E
Clean Air Filter
N
Clean Air Screen
G
Inspect Muffler/Spark Arrester
I
Replace Oil Filter (If equipped)
N
Clean Engine Cooling Fins
E
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient temperatures
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must main tain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
At least once a season, check to see if you should make
any of the adjustments described in the Service and
Adjustments section of this manual.
•
At least once a year you should replace the spark plug,
clean or replace air fi lter, and check blades and belts
for wear. A new spark plug and a clean air fi lter ensure
proper air-fuel mixture and help your engine run better
and last longer.
BEFORE EACH USE
•
Check engine oil level.
•
Check brake operation.
•
Check tire pressure.
•
Check operator presence and ROS systems for proper
operation.
•
Check for loose fasteners.
MAINTENANCE
BEFORE
EVERY
EACH
USE
HOURS
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
➀
➀
➀
➀
➁
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS.
LU BRI CANTS WILL ATTRACT DUST AND DIRT THAT WILL
SHORT EN THE LIFE OF THE SELF-LU BRI CAT ING BEARINGS.
IF YOU FEEL THEY MUST BE LU BRI CAT ED, USE ONLY A
DRY, POW DERED GRAPHITE TYPE LU BRI CANT SPARINGLY.
14
EVERY
EVERY
8
25
50
HOURS
HOURS
3
4
5
1,2
1,2
2
2
LUBRICATION CHART
SPINDLE ZERK
FRONT
WHEEL
BEARING
ZERK
STEERING
SECTOR
GEAR
TEETH
General Purpose Grease
Refer to Maintenance "ENGINE" Section
EVERY
EVERY
BEFORE
100
SEASON
STORAGE
HOURS
1
,
2
2
2
5 - See Cleaning in Maintenance Section.
➀
STEERING PIVOT BOLTS
➀
SPINDLE ZERK
➀
FRONT
WHEEL
BEARING
ZERK
➁
ENGINE
VISCOUS