ARDES AR4P02 Folleto De Instrucciones página 7

To turn the appliance on, you will need to insert the plug into the power
socket and either press one of the two 1000W power buttons on the back
of the appliance, if you wish to operate the appliance at half-power, or
press both for full-power operation.
The appliance is equipped with a dial which acts on an adjustable
thermostat, which cuts off the airflow once the ambient temperature is
reached; the hot airflow starts up again when the ambient temperature
decreases.
The appliance is equipped with a switch which adjusts the thermostat by
stopping the air flow as soon as the desired ambient temperature; hot air
will start to flow again when the ambient temperature drops.
The luminous indicator shows that the device is turned on.
The appliance is equipped with a shut-off switch if it accidentally tips
over.
Make sure that the appliance has cooled down completely before storing
it in the box.
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
This appliance does not require any special maintenance.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
INSTRUcTIONS fOR USE
MAINTENANcE
7