TREVIDEA Girmi MX66 Manual Del Usuario página 12

PARTS MX66 - MX67
1. Speed regulator
4. Motor body
7. Blades
10. Chopper lid (only for MX67)
12. Chopper blades (only for MX67)
OPERATING
STAINLESS STEEL IMMERSION SHAFT
- Assemble motor housing to the immersion stainless-steel shaft as described in the "Assembling the
shaft" section.
- Plug the unit to the electrical outlet.
- Insert the mixer in the bowl with the food to blend (ensure to immerse the entire blade to avoid any
splashing).
- Press the button (speed I or II) to start operating. For best results, follow the instructions in "Setting
processing speed" section.
CAUTION! Do not insert your fingers inside the bowl containing food
- Unplug the hand blender from the electrical outlet, once finished working,
This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes,
sauces, juices, cocktails, soups, vegetable soup, etc. ...
When processing fruits or vegetables, add also a small quantity of water to allow the device to operate in a
homogeneous way.
Insert the motor body (4) in the shaft (6). Rotate anticlockwise until it blocks.
For unblocking, rotate clockwise.
SETTING THE WORKING SPEED
The unit features two working speeds (2 and 3 button) and a speed controller (1).
The speed control allows to modulate the speed of blades or whisk, and it can be used only with the low
speed. The second speed is faster than the first one, even if you put the controller to the maximum level.
For best results and to avoid overheating, it is recommended to use the unit for short and regular intervals,
then for a long time, always making circular movements inside the container of food.
It is also recommended to start processing food from the first speed, then gradually increasing by using the
speed controller, ending up using the faster speed.
WHISK ATTACHMENT
- Assemble chopper set as described in the "Assembling the whisk" section.
- Plug the unit to the electrical outlet.
- Press the button (speed I or II) to start operating.
CAUTION: do not insert your fingers or hair inside the food container.
- Unplug the unit from the outlet once the process is finished.
The whisk attachment is ideal for creating sauces and cream and for whipping and whisking.
Insert the pin of the whisk (9) into the attachment (8).
Insert body (4) in attachment (8) and Rotate anticlockwise until it blocks.
CHOPPER (ONLY FOR MX 67)
Assemble chopper set as described in the "Assembling the chopper" section.
- Plug the unit to the electrical outlet.
- Press the button (speed I or II) to start operating.
2. Switch low speed
5. Plastic beaker
8. Whisk attachment
Assembling the shaft
Assembling the whisk attachment
3. Switch high speed
6. Stainless steel immersion shaft
9. Whisk
11. Chopper bowl (only for MX67)
11