ARDES AR4P08 Folleto De Instrucciones página 7

The appliance can emit both cold air and hot air depending upon the
function selected by means of the function switch. Make sure that the
function switch is in the OFF position before connecting
or disconnecting the appliance.
Proceed as follows to switch on the appliance:
- Insert the plug into the electrical socket
- Select the desired function by means of the function switch (1)
- Adjust the thermostat (2) by turning the switch in a clockwise direction
The appliance is equipped with a switch which adjusts the thermostat by
stopping the air flow as soon as the desired ambient temperature is
reached; hot air will start to flow again when the ambient temperature
drops.
In order to activate the oscillating function, press the switch OSC.
The luminous indicator shows that the appliance is turned on.
Make sure that the appliance has cooled down completely before storing
it in the box.
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
This appliance does not require any special maintenance.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
INSTRUcTIONS fOR USE
MAINTENANcE
7