Publicidad
PRODUCT SET-UP
DEVICE SET-UP
Step 1:
Before installing, write down the serial number and hardware revision (e.g. A1) in case you need to
contact technical support.
Please turn off your computer and unplug the power cord from the computer. Remove the case to
access your motherboard. Firmly insert the DWA-548 adapter into an available PCIe slot inside your
computer.
Once inserted, close the case and insert the power cable back into the computer. Connect both
antennas to the adapter and then turn on your computer. Windows will automatically detect and
install the adapter.
Step 2:
After installation, the D-Link DWA-548 uses the Wireless Connection Manager as the management
software. The manager provides the user with an easy interface to change any settings related to
the wireless adapter. Clicking on the Wireless Connection Manager icon on the desktop will start the
Configuration.
4
DWA-548
Publicidad
