Premier CEL-4456TV Manual De Instrucciones página 27

unpacked.
Battery level indication:
" Your mobile phone can monitor and display the battery state.
" Normally the remaining energy of the battery is indicated by the battery level icon at the upper right
corner of the display screen.
" When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an
alert tone, an alert tone will be given off when the battery level is too low.
" A charging animation appears when the battery is being charged. When the charging is complete,
the animation disappears.
Using a travel adapter:
" Install the battery into the mobile phone before charging the battery.
" Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that
the adapter is fully inserted.
" Insert the plug of the travel charger to an appropriate power outlet.
" During the charging, the battery level grids in the battery icon keep flickering till the battery is fully
charged.
" It is normal of the battery to become hot during the charging period.
" The battery icon does no longer flicker when the charging process ends.
Note:
Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are
inserted in the right direction. Inserting them in a wrong direction may cause charging failure or other
problems.
Before the charging, ensure that the standard voltage and frequency of the local mains supply match the
rated voltage and power of the travel charger.
Using the Battery
The performance of a battery is subject to multiple factors: radio network configuration, signal strength,
ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other
application mode you choose to use.
To guarantee the optimal performance of your battery, please stick to the following rules:
" Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused
during the charging.
" Power off the mobile phone before removing the battery.
" The charging process lasts a longer time for a new battery or a battery not in use for long. If the
battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a
longer time. In this case, the battery icon does not flicker until a long time after the battery enters
the charge status.
" During the charging, ensure the battery is placed in a room temperature environment or in an
environment close to room temperature.
" Immediately stop using the battery if the battery produces odor, overheats, cracks, distorts or has
other damage, or if the electrolyte leaks.
" The battery wears out with use. A longer charging time is required as the battery is put into use for
a long time. If the total conversation duration decreases but the charging time increases even
though the battery is properly charged, purchase a standard battery from the OEM or use a battery
approved by our company. Using any poor-quality fittings will cause harm to your mobile phone or
even incur danger!
Note: To guarantee your personal safety and protect the environment, do not litter the battery! Return
the old battery to the mobile phone manufacturer or place it in specified battery reclamation areas. Do
not litter any battery with other rubbish.
P-8