Publicidad
Idiomas disponibles
Idiomas disponibles
For example, when 11 hours are selected, the LED lamps under numbers 1, 2
and 8 will light up.
After 5 hour, the LED lamps under numbers 1 and 8 will be turned off and
the lamps under numbers 2 and 4 will light up, indicating that the unit will
automatically turn off in 6 hours.
b. To cancel the timer, press the timer key
under 1, 2, 4 and 8 are turned off.
SETTING THE OSCILLATION
The heater will oscillate by pressing the oscillation key ( ) once. To stop
the oscillation, press this key again. This key is only valid when the heater is
working.
REMOTE CONTROL
USING THE REMOTE
The remote has 6 keys that have the following functions:
Press to switch the heater on, press again to switch off
Press this key to select desired power setting:
Low setting (LO), High setting (HI)
Value adjustment key, press it to increase temperature setting
Value adjustment key, press it to decrease temperature setting
Press this key repeatedly to set the timer
Press this key to start or stop the oscillation
INSERTING BATTERIES
1. Press down on the battery compartment cover and slide it out.
2. Insert the batteries, making sure that the positive terminals are facing the proper
direction marked inside the battery compartment
3. Close the cover by sliding it in.
Notes:
1) Use 2 "AAA" batteries (NOT INCLUDED).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon-line) or
rechargeable (nickel-cadmium) batteries.
4) Remove the batteries from remote if is to be
left unused for a long period of time.
5) This product contains no battery.
repeatedly until all the lamps
5
Remote
controller
Battery
Battery
cover
Publicidad
