Front Runner FAFR002 Manual De Instrucciones página 4

2 FIT AND SECURE
2.1
2.2
2.3
FAFR001_REV_A01
4
Using a Rivnut Tool, insert an M6 Rivnut
(Item 10) into each of the eight 9mm holes
drilled in Step 2.3.
Place the various sections of ditch moulding
back into position on the vehicle's roof.
Place a Spacer (Item 6) over each of the
holes drilled in Step 2.3.
Place the Foot Rails (Item 1) onto the
Spacers, aligning the holes in the base of the
Foot Rails with the center of the Spacer. The
product sticker should be at the front of the
vehicle and must face outward.
Place a bead of silicone onto the thread of
each Hex Bolt before fastening.
Secure the Foot Rails to the vehicle using
M6 x 35 Hex Bolts, M6 Spring Washers and
M6 x 19 x 1SS Flat Washers (Items 3, 4 &
10mm
5).
Once fastened, place M6 Nut Caps (Item 2)
over the head of each bolt.
4
13mm
© 2020 FRONT RUNNER VEHICLE OUTFITTERS