LEITZ ProfiCut Manual De Instrucciones página 15

4.3 Working method
4.4 Materials to be machined
Wood, wood-based material, as well as material with comparable cutting properties as per
catalogue details.
Special applications only after release by the manufacturer.
5. Safe handling
5.1 Application
The tool is only allowed to be used as described in the section "Intended use".
The valid national rules for accident prevention and safety at work regulations have to be
observed - especially the safety requirements according to EN 847-1.
5.2 Transport
Wear safety gloves!
Risk of injury due to sharp cutting edges!
Transport only with suitable packaging.
Be very careful when packing / unpacking!
11/2019 ID.524811 V3.0 15