Descargar Imprimir esta página

ARDES AR4P01T Folleto De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
- This appliance should not be used by people (including children) with limited
physical, sensory or mental capacities or anyone who lacks experience and
knowledge, unless they are supervised or have been instructed on how to use the
appliance by someone who is responsible for their safety. Children should not be
allowed to play with appliance.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once.
Do not attempt to repair it, but take it to a service centre approved by the
manufacturer.
If you decide you do not want to use this appliance any longer, disable it by cutting
the power cable - of course, after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid over heating.
If the power cable gets damaged, it has to be replaced only at a service centre
approved by the manufacturer.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate in the home.
Any other use is considered inappropriate and dangerous.
Do not insert objects through the safety grill or the air inlets.
During use, rest the appliance on a flat surface.
Do not place the appliance directly under an electrical socket.
Do not use the heater close to sinks, bathtubs, showers and swimming-pools.
Do not use the heater in presence of flammable substances (petrol,paints, etc.).
Do not place the cord near sources of heat.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OROTHER
COMBUSTIBLE MATERIAL.
WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE AIR
INLETS TO AVOID OVERHEATING.
DO NOT COVER
This product has been manufactured in conformity to current 2006/95/EC and
2004/108/EC
Technical data indicated on the appliance.
To turn the appliance on, insert the plug into the power socket and set the switch on
the back of the appliance to "I".
Press the ON/OFF button on the control panel and the MODE button to select full-
power or half-power operation; the ▲/▼ buttons to set the temperature at which
the appliance turns off, starting up again automatically when the temperature falls
below the set value.
To activate swing, press the OSC button.
To activate the program function, press the TIMER button; each press increases
the time by 1 hour up to a maximum of 9 hours. When the set time has elapsed, the
appliance will turn off automatically.
INSTRUcTIONS fOR USE
5

Publicidad

loading