Echo ES-255ES Manual De Instrucciones página 18

Idiomas disponibles

Before you start

1. Locking ring

1. Blower pipe(main pipe)

Remove blower pipes

1. Blower pipe(main pipe)

2. Blower pipe(fan head

nozzle)

2. Locking ring

Align locking ribs (C) on the blower pipe(main pipe) with re-

cesses (B) in locking ring, and slide the blower pipe(main

pipe) into locking ring.

After pushing upper blower all the way in fan case so that

line (D) will meet locking ring, rotate locking ring clockwise

1/8 turn to lock the blower pipe(main pipe) in place.

NOTE

Blower use will eventually loosen pipe connections. Exclusive

positive locking system allows pipes to be tightened. If loosen-

ing occurs, remove the blower pipe(fan head nozzle) and in-

stall according to instructions 5 & 6.

Align tabs (F) with grooves (E) and slide the blower pipe(fan

head nozzle) over the blower pipe(main pipe) until there is

light resistance.

Assemble the blower pipe(fan head nozzle) onto the blower

pipe(main pipe) until you feel light resistance. Do not force

connection. Hold the blower pipe(main pipe), and turn the

blower pipe(fan head nozzle) clockwise, engaging positive

locking channels until connection is firm. Do not force con-

nection.

Release locking ring with a coin or screwdriver, and rotate

ring so that lock symbol (A) is at top of ring.

Remove pipes from locking ring.