Publicidad
Idiomas disponibles
Idiomas disponibles
Attach wires as follows:
White (L+)
Blue (L-)
Red (R+)
Green (R-)
7. PLAY/PAUSE BUTTON
Press this button to start playback or to resume playback after a pause.
8. 33/45 ROTATION SPEED SETTING BUTTON
Press these buttons to select the platter's rotation according to the speed indicated on the
record for 33, 45 revolutions per minute.
9. Headshell locking nut
Attach the head shell by inserting it into the front end of the tone arm and then turn the locking
nut clockwise.
10. Pitch fader
Used to change the playback speed of the playing trace.
11. Power switch / Stroboscopic light
Turn the switch clockwise to turn on the unit. Turn the switch counter-clockwise to turn off
the unit. The stroboscopic light will automatically turn on when the unit is on.
1. RCA OUTPUT
OUTPUT L and R are used for connecting the turntable to the RCA analog input on your
amplifier.
2. LINE/PHONO SWITCH
The turntable has a built-in PHONO pre-amplifier that is disengaged if you have an external
pre-amplifier. If you want to use the signals amplified by the internal amplifier of the turntable,
move the switch to LINE. If you want to use an external PHONO preamplifier, move the switch
to PHONO.
With the PRE-AMP switch at ON never connect to a Phono input.
Audio will be strongly distorted then and there is a risk that Amplifier and/or
Left channel +
Left channel –
Right channel +
Right channel –
8
Publicidad
