Sony HT-MT500 Manual De Instrucciones página 20

Connecting by Selecting the
Network Name (SSID)
If your wireless LAN router (access point)
is not compatible with Wi-Fi Protected
Setup (WPS), check the following
information in advance.
– The network name (SSID)*
_____________________________________
– The security key (password)**
_____________________________________
* SSID (Service Set Identifier) is a name that
identifies a particular access point.
**This information should be available
from a label on your wireless LAN router/
access point, from the operating
instructions, from the person who set up
your wireless network, or from the
information provided by your Internet
service provider.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] from the home
menu.
The setup display appears on the TV
screen.
3
Select [Network Settings] -
[Internet Settings] - [Wireless
Setup].
The list of the network name
appears on the TV screen.
4
Select the desired network name
(SSID).
5
Enter the security key (or
password) using the software
keyboard, and then select [Enter].
The system starts connecting to the
network.
20
US
Connecting by Using a Fixed
IP Address
Select [New connection registration] -
[Manual registration] in step 4 of
"Connecting by Selecting the Network
Name (SSID)"and follow the on-screen
instructions.
Connecting by Using a PIN
Code
Select [New connection registration] in
step 4 of "Connecting by Selecting the
Network Name (SSID)" and select [(WPS)
PIN Method].
Connecting by SongPal
SongPal can connect the system to the
same wireless network as that of the
mobile device. For details, follow the
instruction of the app or refer to the
following URL.
http://info.songpal.sony.net/help/