Publicidad
STEP 5
1. Insert 4 wood dowels (C) into wood dowel holes on upper shelf (8).
2. Attach upper shelf (8) to third back panel (6) and upper cross bar (7) by inserting wood
dowels (C) into wood dowel holes on third back panel (6) and upper cross bar (7).
3. Insert 6 screws (D) through holes on upper shelf (8), then tighten to third back panel (6) and
upper cross bar (7).
the word 'pre-threaded' to describe any
STEP 6
m cam bolt holes, wood dowel holes,
1. Insert 4 wood dowels (C) into wood dowel holes on upper shelf (8).
2. Attach 2 upper divider boards (11) to upper shelf (8) by inserting cam bolts (A) into cam lock
holes and inserting wood dowels (C) into wood dowel holes on divider boards (11).
3. Insert 4 cam locks (B) into cam lock holes on upper divider boards (11), then rotate clockwise
to secure cam bolts in place.
D
8
D
D
D
D
D
B
11
B
B
11
7
6
C
C
C
C
8
B
C C
8
C
C
Publicidad
