Coby CHBT-617 Manual De Usuario página 3

INTRODUCTION
Thank you for purchasing the CHBT-617! Please read this manual
fully before using this device. The terms used within will become more
familiar as you use your headphones.
CHARGING
Charge your headphones fully before your first use. To charge, insert the
microUSB cable into the charging port, and connect to a power source.
When it is charging, the indicator light will glow red. Charging time takes
up to 2 hours.
When the headset is running out of battery, the blue indicator light will
appear and an alarm sound will be heard. Please charge the battery
immediately. If the headphones are used after this warning, they will
automatically turn off after 5 to 10 minutes.
BLUETOOTH
To connect the headphones to your audio device, first turn the
headphones on by pressing the Power Button. The headphones will
make a noise when they are turned on, and a blue indicator light will
flash when they enter Bluetooth
Open the Bluetooth
"CHBT-617." If asked to enter a passcode, enter in "0000" or "1234."
When the headphones have connected successfully, they will make a
confirmation sound.
LINE-IN FUNCTION
To use your headphones as normal, wired headphones, use the
included 3.5mm audio cable. Insert one end into the Aux In Jack of the
headphones, and the other into the normal headphone port of your
audio device.
CONTROLS
1) Power and4/;Button
2) 9 and : Buttons
3) Call Button
4) Microphone
US
®
®
Mode.
®
function on your audio device, and connect to
1
4
2
3
5) Aux In Jack
6) LED Indicator Light
7) Micro USB Charging Port
2
5
6
7