Publicidad
Enlaces rápidos
9461500COM (Federal White & Columbia Walnut)
9461501COM (Federal White & Ironwood)
FULL WALL BED
Date of Purchase ___ / ___ / ___
Lot Number:
WARNING:
* WARNING FOR YOUNG CHILDREN -
This product contains small components,
please ensure that they are kept away
from small children. Children under the
age of 6, small infants and babies must
not sleep on this bed for safety reasons.
To prevent injury and damage to this unit,
PROHIBIT jumping on it.
* This product is designed for home use
and not intended for commercial use.
We highly recommend having a
professional assemble your
product
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall
- Do Not allow children to climb on unit
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
You
Tube
B349461000COM0
Tough
Publicidad
Manuales relacionados para Signature Sleep 9461500COM
Resumen de contenidos para Signature Sleep 9461500COM
- Página 1 9461500COM (Federal White & Columbia Walnut) 9461501COM (Federal White & Ironwood) FULL WALL BED B349461000COM0 Date of Purchase ___ / ___ / ___ Lot Number: WARNING: * WARNING FOR YOUNG CHILDREN - This product contains small components, please ensure that they are kept away from small children.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
- Página 4 Board Identification Not actual size ameriwoodhome.com...
- Página 5 Board Identification parts for 9461500COM (Federal White & Columbia Walnut) Parts List PART ITEM QTY DESCRIPTION NUMBER 39461306010 LEFT PANEL 39461306020 RIGHT PANEL 39461306030 39461306040 BOTTOM 39461306050 VALANCE 39461306060 KICK 39461306070 UPPER BACK PANEL 39461306080 LOWER BACK PANEL 39461306090 STOP RAIL...
- Página 6 Board Identification parts for 9461501COM (Federal White & Ironwood) Parts List PART ITEM QTY DESCRIPTION NUMBER 39461306010 LEFT PANEL 39461306020 RIGHT PANEL 39461306030 39461306040 BOTTOM 39461306050 VALANCE 39461306060 KICK 39461306070 UPPER BACK PANEL 39461306080 LOWER BACK PANEL 39461306090 STOP RAIL 39461306120 BOTTOM STRINGER 39461337130...
- Página 7 Note that your unit may contain extra hardware Part List Actual Size (x22) (x8) (x22) (x24) #A22610 #A13950 #A22620 #A12105 cam bolt #8x3-1/2" pan head cam lock #8x7/16" pan head (x16) (x10) (x14) (x6) (x4) #A12400 #A17400 #A22910 #A43020 #A21660 #8x5/8"...
- Página 8 Note that your unit may contain extra hardware Part List Not Actual Size ATTENTION / ATENCION / ATTENTION (x1) (x2) #B64481 #A53465 warning label u-bracket (x2) #A50592 handle ameriwoodhome.com...
- Página 9 Bed Frame Identification Not Actual Size Note: Not all parts will be identified. Left Assembly Mattress Holder (2) Right Assembly 3678096-20c 3678096-20a 3678096-20d 3678096-20b Left Pivot Arm Right Pivot Arm Wood Slat (28) Gas Piston (4) Plastic Cap (56) U Bracket (4) 3678096-20e 3678096-20f 3678096-20g...
- Página 10 VERY IMPORTANT INFORMATION INFORMACION MUY IMPORTANTE INFORMATION TRÊS IMPORTANTES ameriwoodhome.com...
- Página 11 STEP 1 (x4) (x2) (x6) Proper orientation of Cam Lock Proper orientation of Cam Lock FLIP ameriwoodhome.com...
- Página 12 STEP 2 (x4) (x4) Proper orientation of Cam Lock Proper orientation of Cam Lock ameriwoodhome.com...
- Página 13 STEP 3 (x2) (x4) Proper orientation of Cam Lock Proper orientation of Cam Lock ameriwoodhome.com...
- Página 14 STEP 4 (x2) (x4) (x4) Proper orientation of Cam Lock FLIP Proper orientation of Cam Lock Proper orientation of Connector ameriwoodhome.com...
- Página 15 STEP 5 (x8) ameriwoodhome.com...
- Página 16 STEP 6 (x6) (x2) (x4) Proper orientation of Connector Proper orientation of Cam Lock Proper orientation of Connector Proper orientation of Cam Lock ameriwoodhome.com...
- Página 17 STEP 7 (x11) ameriwoodhome.com...
- Página 18 STEP 8 (x8) The Left Pivot Arm (20e) is located in the 3678096COM Wall Bed Mechanism box ameriwoodhome.com...
- Página 19 STEP 9 (x11) ameriwoodhome.com...
- Página 20 STEP 10 (x8) The Right Pivot Arm (20f) is located in the 3678096COM Wall Bed Mechanism box ameriwoodhome.com...
- Página 21 STEP 11 turn clockwise to lock in place ameriwoodhome.com...
- Página 22 STEP 12 turn clockwise to lock in place ameriwoodhome.com...
- Página 23 STEP 13 ameriwoodhome.com...
- Página 24 STEP 14 ameriwoodhome.com...
- Página 25 STEP 15 ameriwoodhome.com...
- Página 26 STEP 16 (x4) (x4) Lay the unit onto its front Tap in Bushings (12) with a hammer Screw in Glides (6) all the way ameriwoodhome.com...
- Página 27 The next steps are to assemble your unit to the wall Assembled unit MUST be square on the height, width, and depth to function properly Assembled unit MUST be placed flat against the wall Assembled unit MUST be screwed into wall studs at the top and bottom for safety You need to locate at least 3 studs, but 4 is better DO NOT use wall anchors to fasten your unit to the wall...
- Página 28 STEP 17 Place your unit FLUSH against the wall There are notches provided at the back of your unit. These notches are to fit around the baseboard on your wall. If your baseboard is higher or thicker than the notches provided on the unit, you will need to remove the baseboard, cut it down to fit on both sides of your...
- Página 29 STEP 18 Assembled unit MUST be flush on the height, width, and depth to function properly A ladder will be required Do not lean against the top of the unit, it may cause sagging If required, unscrew the Glides counter-clockwise as necessary in all 4 corners until your unit is level in all directions...
- Página 30 STEP 19 Locate the studs in the wall, using a stud finder. Using a pencil, mark the stud locations on the upper surface of the Upper Back Panel (G). Using a level, carry the stud locations down to the Bottom Stringer (L), and with a pencil, mark the stud locations.
- Página 31 STEP 20 (x8) First, make sure that your unit is still level in all directions. Drill 1/8" (3mm) pilot holes through the Upper Back Panel (G) and Bottom Stringer (L) at the stud locator marks. Fasten the unit to the studs in the wall with the Screws (3). A ladder will be required Do not lean against the top of the unit, it may...
- Página 32 The next steps are to assemble the metal bed frame and mechanism These parts are located in the #3678096COM Wall Bed Mechanism Carton ameriwoodhome.com...
- Página 33 STEP 21 (x2) (x1) (x4) press in each hole ameriwoodhome.com...
- Página 34 STEP 22 (x1) (x4) (x8) (x8) ameriwoodhome.com...
- Página 35 STEP 23 (x1) (x4) ameriwoodhome.com...
- Página 36 STEP 24 (x4) (x4) (x4) The "long" end of both pistons is to be fastened here The "long" end of both pistons is to be fastened here The ends of both pistons need to be inserted into the groove of the bed frame when assembled. ameriwoodhome.com...
- Página 37 STEP 25 (x2) (x2) (x1) Already fastened to your unit The cabinet is not shown to allow a clear view of the bed frame assembly With a person on each side, lift the bed mechanism, line up the holes of the Bed Assembly with the large bushing hole of the Left and Right Pivot arm (20e &...
- Página 38 STEP 26 (x4) (x1) With a person on each side, carefully lift the bed frame in the closed position. While one person pushes the bed frame into the cabinet, passed the 90 degrees, the other person is to engage the "front" Gas Piston (20h) on each side of the unit, to the front pin of the Left and Right Pivot Arm push here...
- Página 39 STEP 27 ATTENTION / ATENCION / ATTENTION (x1) (x2) (x2) The cabinet is not shown to allow a clear view of the bed frame assembly Pull the bed frame down, then attach Leg (20c) as shown Apply Warning Label here The bed frame is equipped with a locking mechanism to lock the Leg (20c) in place.
- Página 40 STEP 28 (x6) (x3) Proper orientation of bracket ameriwoodhome.com...
- Página 41 STEP 29 (x6) (x3) Proper orientation of bracket ameriwoodhome.com...
- Página 42 STEP 30 (x4) (x2) Proper orientation of bracket ameriwoodhome.com...
- Página 43 STEP 31 (x4) (x2) Proper orientation of bracket ameriwoodhome.com...
- Página 44 STEP 32 Support Rail With the help of another person, carefully close the bed frame. Then, lift the Left Lower Door Panel (O), and position the Brackets (13) over the one support rail of the bed frame. Drop into position. Assure the panel is vertically inline with the bed frame.
- Página 45 STEP 33 (x4) With the help of another person, carefully pull the bed frame open Line up the holes of the bed frame with the holes in the Left Lower Door Panel (O). Locate the four corner holes of the panel. Fasten with four screws (11). The cabinet is not shown to allow a clear view of the bed frame assembly...
- Página 46 STEP 34 Support Rail With the help of another person, carefully close the bed frame. Then, lift the Right Lower Door Panel (P), and position the Brackets (13) over the one support rail of the bed frame. Drop into position. Assure the panel is vertically inline with the bed frame.
- Página 47 STEP 35 (x4) With the help of another person, carefully pull the bed frame open Line up the holes of the bed frame with the holes in the Right Lower Door Panel (P). Locate the four corner holes of the panel. Fasten with four screws (11). The cabinet is not shown to allow a clear view of the bed frame assembly...
- Página 48 STEP 36 Support Rail With the help of another person, carefully close the bed frame. Then, lift the Left Upper Door Panel (M), and position the Brackets (13) over the two support rails of the bed frame. Drop into position. IMPORTANT: First, unlock and flip the leg into the cabinet.
- Página 49 STEP 37 (x4) With the help of another person, carefully pull the bed frame open Line up the holes of the bed frame with the holes in the Left Upper Door Panel (M). Locate the four corner holes of the panel. Fasten with four screws (11). The cabinet is not shown to allow a clear view of the bed frame assembly...
- Página 50 STEP 38 Support Rail With the help of another person, carefully close the bed frame. Then, lift the Right Upper Door Panel (N), and position the Brackets (13) over the two support rails of the bed frame. Drop into position. IMPORTANT: First, unlock and flip the leg into the cabinet.
- Página 51 STEP 39 (x4) With the help of another person, carefully pull the bed frame open Line up the holes of the bed frame with the holes in the Right Upper Door Panel (N). Locate the four corner holes of the panel. Fasten with four screws (11). The cabinet is not shown to allow a clear view of the bed frame assembly...
- Página 52 STEP 40 With the help of another person, carefully close the bed frame. Assure all four door panels are vertically and horizontally in line with each other. If not, open the bed frame and adjust the corner screws accordingly by loosening, adjusting and tightening.
- Página 53 STEP 41 (x16) With the help of another person, carefully pull the bed frame open Fasten the rest of the screws (11). The cabinet is not shown to allow a clear view of the bed frame assembly ameriwoodhome.com...
- Página 54 STEP 42 (x4) (x2) Place the U-Brackets (14) as shown. Then fasten with screws (2). The cabinet is not shown to allow a clear view of the bed frame assembly ameriwoodhome.com...
- Página 55 STEP 43 (x6) (x2) With the help of another person, have one person position the handles (16) underneath the door panels, and have another person feed the bolts (8) to fasten both handles. ameriwoodhome.com...
- Página 56 STEP 44 (x4) (x56) (x28) A ladder will be required Do not lean against the top of the unit, it may cause sagging Fasten Stop Rail (I) to the underside of Top (C) with Screws (11) Press a Plastic Cap (20j) at each end of a Wood Slat (20g).
- Página 57 STEP 45 Front of unit is not shown to allow a clear view of the kick and bottom open frame slightly While one person slightly opens the bed frame and holds it in place, insert the connector bolts installed in the Kick (F) into the connectors of the Bottom (D).
- Página 58 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. This bed is designed to accommodate a Full Size Mattress, up to 10" inches thick. * with a maximum weight of 60 lbs (27.2 kgs) * with a minimum weight of 30 lbs (13.6 kgs) After you have finished assembling your...
- Página 59 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 60 Español Cubie rta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 61 Español Sistema de fijar el bloqueo de leva (página 3) Esta sistema de fijar el bloqueo de leva sera usado en todo el proceso ensamble. Página 7 Tenga en cuenta que su unidad puede contener hardware adicional Página 9 Nota: No se identificarán todas las piezas. Página 11, 12, 13, 14, 16 orientación adecuada del bloqueo de la leva dale la vuelta...
- Página 62 Español Página 28 Coloque su unidad al ras contra la pared Hay muescas en la parte posterior de su unidad. Estas muescas deben encajar alrededor del zócalo de la pared. Si su zócalo es más alto o más grueso que las muescas provistas en la unidad, deberá quitar el zócalo, cortarlo para que quepa en ambos lados de su unidad y luego volver a fijarlo a la pared.
- Página 63 Español Página 36 El extremo "largo" de ambos pistones debe fijarse aquí. Los extremos de ambos pistones deben insertarse en la ranura del marco de la cama cuando se ensamblan. Página 37 Ya fijado a su unidad Con una persona a cada lado, levante el mecanismo de la cama, alinee los orificios del conjunto de la cama con el orificio del buje grande del brazo de pivote izquierdo y derecho (20e y 20f) ya instalado en su unidad e inserte los pasadores de pivote (20k) como se muestra.
- Página 64 Español Página 44 (continuación) Asegúrese de que el panel esté verticalmente alineado con el marco de la cama. El gabinete no se muestra para permitir una visión clara del conjunto del marco de la cama. Soporte ferroviario Estos orificios en el panel inferior izquierdo de la puerta (O) estarán más cerca del borde. Página 45 Con la ayuda de otra persona, abra con cuidado el marco de la cama.
- Página 65 Español Página 49 Con la ayuda de otra persona, abra con cuidado el marco de la cama. Alinee los orificios del marco de la cama con los orificios en el panel superior izquierdo de la puerta (M). Localice los cuatro orificios de esquina del panel. Sujetar con cuatro tornillos (11). El gabinete no se muestra para permitir una visión clara del conjunto del marco de la cama.
- Página 66 Español Página 55 Con la ayuda de otra persona, tenga uno Posición de la persona de las asas (16) debajo los paneles de las puertas, y hacer que otra persona se alimente los pernos (8) para sujetar ambas asas. Página 56 Se requerirá...
- Página 67 Español Página 59 Registre su producto para recibir lo siguiente: * Detalles de nuevas tendencias - Vistazo a lo nuevo * Encuestas - alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Para registrar su producto, visite ameriwoodhome.com Clasificasión de 5 estrellas Visite el sitio web de su tienda local, califique su comprado...
- Página 68 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
- Página 69 Français Système de Fixation de Came (page 3) Ce Système de Fixation de Came sera utilisé tout au long de l'assemblage Page 7 Notez que votre appareil peut contenir du matériel supplémentaire Page 9 Remarque: les pièces ne seront pas toutes identifiées. Page 11, 12, 13, 14, 16 bonne orientation du verrou à...
- Página 70 Français Page 28 Placez votre appareil contre le mur Il y a des encoches à l'arrière de votre appareil. Ces encoches doivent s'adapter autour de la plinthe sur votre mur. Si votre plinthe est plus haute ou plus épaisse que les encoches fournies sur l'unité, vous devrez retirer la plinthe, la couper pour qu'elle s'adapte des deux côtés de votre unité, puis la remettre au mur.
- Página 71 Français Page 36 L'extrémité "longue" des deux pistons doit être fixée ici Les extrémités des deux pistons doivent être insérées dans la rainure du cadre de lit une fois assemblées. Page 37 Déjà attaché à votre appareil Avec une personne de chaque côté, soulevez le mécanisme du lit, alignez les trous de l'assemblage du lit avec le grand trou de douille des bras de pivot gauche et droit (20e et 20f) déjà...
- Página 72 Français Page 44 (suite) Assurez-vous que le panneau est verticalement en ligne avec le cadre du lit. L'armoire n'est pas illustrée pour permettre une vue claire de l’ensemble du cadre de lit. Rail de soutien Ces trous dans le panneau inférieur gauche de la porte (O) seront plus proches du bord. Page 45 Avec l’aide d’une autre personne, tirez soigneusement le cadre du lit ouvert.
- Página 73 Français Page 49 Avec l'aide d'une autre personne, tirez soigneusement le cadre du lit ouvert. Alignez les trous du cadre de lit avec les trous dans le panneau supérieur gauche de la porte (M). Localisez les quatre trous d’angle du panneau. Fixer avec quatre vis (11). L'armoire n'est pas illustrée pour permettre une vue claire de l'ensemble du cadre de lit.
- Página 74 Français Page 55 Avec l’aide d’une autre personne, ayez-en une positionner les poignées (16) en dessous les panneaux de porte, et avoir une autre personne nourrir les boulons (8) pour fixer les deux poignées. Page 56 Une échelle sera nécessaire Ne vous appuyez pas contre le haut de l’unité, cela peut provoquer un affaissement Fixez le rail d’arrêt (I) sur la face inférieure du haut (C) avec des vis (11) Appuyez sur un capuchon en plastique (20j) à...
- Página 75 Français Page 59 Enregistrez votre produit pour recevoir les éléments suivantes: * Détails sur les nouvelles tendances - un aperçu sur les nouveautés * Sondages - avoir une voix au sein de notre communauté * Offres exclusives et codes promo * Service de pièces de rechange rapide et facile Pour enregistrer votre produit, visitez ameriwoodhome.com 5 Étoiles...