Publicidad
Enlaces rápidos
1108222COM (Columbia Walnut)
1108335COM (Nightfall Oak)
1108341COM (Magnolia Oak)
1108344COM (Silverton Oak)
1108356COM (Monterey Oak)
1108900COM (Centralia Oak)
FULL WALL BED
Date of Purchase ___ / ___ / ___
Lot Number:
WARNING:
* WARNING FOR YOUNG CHILDREN -
This product contains small components,
please ensure that they are kept away
from small children. Children under the
age of 6, small infants and babies must
not sleep on this bed for safety reasons.
To prevent injury and damage to this unit,
PROHIBIT jumping on it.
* This product is designed for home use
and not intended for commercial use.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Visit: www.ameriwoodhome.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Professional installation is
required for this unit.
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall
- Do Not allow children to climb on unit
Professional
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
You
Tube
B341108000COM3
Publicidad
Manuales relacionados para Signature Sleep 1108222COM
Resumen de contenidos para Signature Sleep 1108222COM
- Página 1 1108222COM (Columbia Walnut) 1108335COM (Nightfall Oak) 1108341COM (Magnolia Oak) 1108344COM (Silverton Oak) 1108356COM (Monterey Oak) 1108900COM (Centralia Oak) FULL WALL BED B341108000COM3 Date of Purchase ___ / ___ / ___ Lot Number: WARNING: * WARNING FOR YOUNG CHILDREN - This product contains small components, please ensure that they are kept away from small children.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
- Página 4 Board Identification Not actual size ameriwoodhome.com...
- Página 5 Board Identification parts for 1108222COM (Columbia Walnut) Parts List PART ITEM QTY DESCRIPTION NUMBER 31108222010 LEFT PANEL ASM 31108222020 RIGHT PANEL ASM 31108222031 31108222041 BOTTOM 31108222051 VALANCE 31108222061 KICK 31108222071 UPPER BACK PANEL 31108222081 LOWER BACK PANEL 31108222091 STOP RAIL...
- Página 6 Board Identification parts for 1108344COM (Silverton Oak) Parts List PART ITEM QTY DESCRIPTION NUMBER 31108344010 LEFT PANEL ASM 31108344020 RIGHT PANEL ASM 31108344031 31108344041 BOTTOM 31108344051 VALANCE 31108344061 KICK 31108344071 UPPER BACK PANEL 31108344081 LOWER BACK PANEL 31108344091 STOP RAIL 31108344100 LEFT DOOR PANEL 31108344110...
- Página 7 Note that your unit may contain extra hardware Part List Actual Size (x22) (x8) (x22) (x16) #A22610 #A13950 #A22620 #A12105 cam bolt #8x3-1/2" pan head cam lock #8x7/16" pan head (x16) (x10) (x14) (x4) (x8) #A12400 #A22910 #A43020 #A21660 #A25400 #8x5/8"...
- Página 8 Bed Frame Identification Not Actual Size Note: Not all parts will be identified. Left Assembly Mattress Holder (2) Right Assembly 3678096-20c 3678096-20a 3678096-20d 3678096-20b Left Pivot Arm Right Pivot Arm Wood Slat (28) Gas Piston (4) Plastic Cap (56) U Bracket (4) 3678096-20e 3678096-20f 3678096-20g...
- Página 9 Before you start! VERY IMPORTANT INFORMATION! Caution: Failure to use 2 professionals for this assembly could result in unit damage or personal injury. ameriwoodhome.com...
- Página 10 STEP 1 (x4) (x2) (x6) Proper orientation of Cam Lock Proper orientation of Cam Lock FLIP ameriwoodhome.com...
- Página 11 STEP 2 (x4) (x4) Proper orientation of Cam Lock Proper orientation of Cam Lock ameriwoodhome.com...
- Página 12 STEP 3 (x2) (x4) Proper orientation of Cam Lock Proper orientation of Cam Lock ameriwoodhome.com...
- Página 13 STEP 4 (x2) (x4) (x4) Proper orientation of Cam Lock FLIP Proper orientation of Cam Lock Proper orientation of Connector ameriwoodhome.com...
- Página 14 STEP 5 (x8) ameriwoodhome.com...
- Página 15 STEP 6 (x6) (x2) (x4) Proper orientation of Connector Proper orientation of Cam Lock Proper orientation of Connector Proper orientation of Cam Lock ameriwoodhome.com...
- Página 16 STEP 7 (x11) ameriwoodhome.com...
- Página 17 STEP 8 (x8) The Left Pivot Arm (20e) is located in the 3678096COM Wall Bed Mechanism box ameriwoodhome.com...
- Página 18 STEP 9 (x11) ameriwoodhome.com...
- Página 19 STEP 10 (x8) The Right Pivot Arm (20f) is located in the 3678096COM Wall Bed Mechanism box ameriwoodhome.com...
- Página 20 STEP 11 turn clockwise to lock in place Assembly orientation is critical! ameriwoodhome.com...
- Página 21 STEP 12 turn clockwise to lock in place ameriwoodhome.com...
- Página 22 STEP 13 ameriwoodhome.com...
- Página 23 STEP 14 ameriwoodhome.com...
- Página 24 STEP 15 ameriwoodhome.com...
- Página 25 STEP 16 (x4) (x4) Lay the unit onto its front Tap in Bushings (12) with a hammer Screw in Glides (6) all the way ameriwoodhome.com...
- Página 26 The next steps are to assemble your unit to the wall Assembled unit MUST be square on the height, width, and depth to function properly Assembled unit MUST be placed flat against the wall Assembled unit MUST be screwed into 3 DIFFERENT wall studs at the top and bottom for safety Screws provided are for drywall and wood studs.
- Página 27 STEP 17 With the help of another person, place your unit FLUSH against the wall Do NOT cut into bed! There are notches provided at the back of your unit. These notches are to fit around the baseboard on your wall. If your baseboard is higher or thicker than the notches provided on the unit, you will need to remove the baseboard, cut it...
- Página 28 STEP 18 Assembled unit MUST be flush on the height, width, and depth to function properly A ladder will be required Do not lean against the top of the unit, it may cause sagging If required, unscrew the Glides counter-clockwise as necessary in all 4 corners until your unit is level in all directions...
- Página 29 STEP 19 You need to locate at least 3 DIFFERENT studs, in the horizontal direction, but 4 is better. Stud Stud Stud Stud Top(C) Locate the studs in the wall, using a stud finder.Using a pencil, mark the stud locations on the upper surface of the Upper Back Panel (G) above Top (C).Using a level, carry...
- Página 30 STEP 20 (x8) First, make sure that your unit is still level in all directions. Drill 1/8" (3mm) pilot holes through the Upper Back Panel (G) and Bottom Stringer (L) at the stud locator marks. Fasten the unit to the studs in the wall with the Screws (3).
- Página 31 The next steps are to assemble the metal bed frame and mechanism These parts are located in the #3678096COM Wall Bed Mechanism Carton ameriwoodhome.com...
- Página 32 STEP 21 (x2) (x1) (x4) press in each hole ameriwoodhome.com...
- Página 33 STEP 22 (x1) (x4) (x8) (x8) ameriwoodhome.com...
- Página 34 STEP 23 (x1) (x4) ameriwoodhome.com...
- Página 35 STEP 24 (x4) (x4) (x4) The "long" end of both pistons is to be fastened here The "long" end of both pistons is to be fastened here The ends of both pistons need to be inserted into the groove of the bed frame when assembled. ameriwoodhome.com...
- Página 36 STEP 25 (x2) (x2) (x1) Already fastened to your unit The cabinet is not shown to allow a clear view of the bed frame assembly With a person on each side, lift the bed mechanism, line up the holes of the Bed Assembly with the large bushing hole of the Left and Right Pivot arm (20e &...
- Página 37 STEP 26 (x4) (x1) With a person on each side, carefully lift the bed frame in the closed position. While one person pushes the bed frame into the cabinet, passed the 90 degrees, the other person is to engage the "front" Gas Piston (20h) on each side of the unit, to the front pin of the Left and Right Pivot Arm push here...
- Página 38 STEP 27 ATTENTION / ATENCION / ATTENTION (x1) (x2) (x2) The cabinet is not shown to allow a clear view of the bed frame assembly Pull the bed frame down, then attach Leg (20c) as shown Apply Warning Label here The bed frame is equipped with a locking mechanism to lock the Leg (20c) in place.
- Página 39 STEP 28 (x8) (x4) (x4) (x4) Proper orientation of bracket Handle Molding (M) is to be centered on the Left Door Panel (J) ameriwoodhome.com...
- Página 40 STEP 29 (x8) (x4) (x4) (x4) Proper orientation of bracket Handle Molding (M) is to be centered on the Right Door Panel (K) ameriwoodhome.com...
- Página 41 STEP 30 Support Rail With the help of another person, lift the Left Door Panel (J), position the Brackets (13) over the three Support Rails of the Bed Frame, and drop into position. Repeat the procedure for the Right Door Panel (K). IMPORTANT: First, unlock and flip the leg into the cabinet.
- Página 42 STEP 31 (x38) With the help of another person, carefully pull the bed frame open Line up the holes of the bed frame with the holes in Panels (J&K), and fasten with Screws (11). The cabinet is not shown to allow a clear view of the bed frame assembly ameriwoodhome.com...
- Página 43 STEP 32 (x4) (x56) (x28) A ladder will be required Do not lean against the top of the unit, it may cause sagging Fasten Stop Rail (I) to the underside of Top (C) with Screws (11) finished edge Press a Plastic Cap (20j) at each end of a Wood Slat (20g).
- Página 44 STEP 33 Front of unit is not shown to allow a clear view of the kick and bottom open frame slightly While one person slightly opens the bed frame and holds it in place, insert the connector bolts installed in the Kick (F) into the connectors of the Bottom (D).
- Página 45 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. This bed is designed to accommodate a Full Size Mattress, up to 10" inches thick. * with a maximum weight of 60 lbs (27.2 kgs) * with a minimum weight of 30 lbs (13.6 kgs) After you have finished assembling your...
- Página 46 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.com Visit your local retailer's website, rate your purchased product and leave us some feedback! ameriwoodhome.com...
- Página 47 Espa ol Cubie rta Delantera Este libro de instrucciones contiene informaci n IMPORTANTE de seguridad. Por favor lea y mant ngalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda.
- Página 48 Espa ol Sistema de fijar el bloqueo de leva (p gina 3) Esta sistema de fijar el bloqueo de leva sera usado en todo el proceso ensamble. P gina 7 Tenga en cuenta que su unidad puede contener hardware adicional P gina 8 Nota: No se identificar n todas las piezas.
- Página 49 Espa ol P gina 26 Los siguientes pasos son ensamblar su unidad a la pared SE REQUIERE INSTALACI N PROFESIONAL La unidad ensamblada DEBE ser cuadrada en la altura, el ancho,y profundidad para funcionar correctamente La unidad ensamblada DEBE colocarse plana contra la pared La unidad ensamblada DEBE atornillarse en 3 DIFERENTES Montantes de pared en la parte superior e inferior para mayor seguridad Los tornillos provistos son para paneles de yeso y montantes de madera.
- Página 50 Espa ol P gina 30 Primero, aseg rese de que su unidad a n est nivelada en todas las direcciones. Taladre orificios gu a de 1/8 "(3 mm) a trav s del panel posterior superior (G) y el larguero inferior (L) en las marcas de ubicaci n de los postes.
- Página 51 Espa ol P gina 38 El gabinete no se muestra para permitir una vista clara del ensamblaje del marco de la cama Jale el marco de la cama hacia abajo, luego conecte la Pata (20c) como se muestra El armaz n de la cama est equipado con un mecanismo de bloqueo para bloquear la Pata (20c) en su lugar.
- Página 52 Espa ol Repita el procedimiento para las 28 tablillas de madera y las 56 tapas de pl stico. Deslice los listones de madera debajo de las correas en cada esquina. P gina 44 marco abierto ligeramente La parte delantera de la unidad no se muestra para permitir una vista clara de la patada y el fondo. Mientras una persona abre ligeramente el armaz n de la cama y lo mantiene en su lugar, inserte los pernos del conector instalados en la patada (F) en los conectores de la parte inferior (D).
- Página 53 Fran ais Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA S CURIT . VEUILLEZ LIRE ET GARDER POUR UNE R F RENCE FUTURE Ne retournez pas ce produit! Contactez notre quipe de service la client le amicale d'abord pour obtenir de l'aide.
- Página 54 Fran ais Syst me de Fixation de Came (page 3) Ce Syst me de Fixation de Came sera utilis tout au long de l'assemblage Page 7 Notez que votre appareil peut contenir du mat riel suppl mentaire page 8 Remarque: les pi ces ne seront pas toutes identifi es. page 9 Avant de commencer ! INFORMATION TR S IMPORTANTE !
- Página 55 Fran ais Page 26 Les prochaines tapes consistent assembler votre unit au mur INSTALLATION PROFESSIONNELLE REQUISE L'unit assembl e DOIT tre carr e sur la hauteur, la largeur, et de la profondeur pour fonctionner correctement L'unit assembl e DOIT tre plac e plat contre le mur L'unit assembl e DOIT tre viss e en 3 Montants muraux en haut et en bas pour plus de s curit Les vis fournies sont pour les cloisons s ches et les montants en bois.
- Página 56 Fran ais Page 30 Tout d'abord, assurez-vous que votre appareil est toujours de niveau dans toutes les directions. Percez des avant-trous de 3mm (1/8 po) travers le panneau arri re sup rieur (G) et le support inf rieur (L) au niveau des rep res de localisation des montants. Fixez l'unit aux montants du mur avec les vis (3).
- Página 57 Fran ais Page 38 L'armoire n'est pas illustr e pour permettre une vue d gag e de l'ensemble du cadre de lit Tirez le cadre de lit vers le bas, puis fixez la jambe (20c) comme illustr Le cadre de lit est quip d'un m canisme de verrouillage pour verrouiller la jambe (20c) en place. Pour verrouiller ou d verrouiller le pied, tirez sur le m canisme de verrouillage.
- Página 58 Fran ais R p tez la proc dure pour les 28 lattes de bois et 56 capuchons en plastique. bord fini Glissez les lattes de bois sous les sangles chaque coin Page 44 cadre l g rement ouvert L'avant de l'appareil n'est pas illustr pour permettre une vue d gag e sur le support et le bas Pendant qu'une personne ouvre l g rement le cadre du lit et le maintient en place, ins rez les boulons de connexion install s dans le support (F) dans les connecteurs du bas (D).