Installation
5
Installation
CAUTION!
Before installation, check that the local distribution conditions (gas type
and pressure) and the settings of the appliance compatible.
The adjustment conditions for this appliance are provided on the label
(or on the data plate).
This appliance is not connected to a combustion product evacuation
system. It must be installed and connected in accordance with the
installation rules in force. Special attention must be given to relevant
ventilation governing provisions.
5.1 Installation hole
CAUTION!
The appliance should be kept away from flammable materials.
This appliance belongs to CLASS 3: APPLIANCE TO BE BUILT INTO A KITCHEN
UNIT OR WORKTOP.
Minimum distances to observe from the walls (Fig. 2, page 2)
Distance
135 mm
From the outer edge of the burner head closest to one of the side
walls and/or bottom.
500 mm
Between the top of the burners and the furniture or shelves
present above the hob.
30 mm
The distance between the bottom of the burner and the
underside.
32
Position
EN