FUNCTIONS
The vibration unit requires three size AAA batteries (not included). It is recommended that
you use alkaline batteries for longer battery life.
CAUTION:
To prevent possible battery leakage, be
sure to follow the guidelines outlined below.
• Dispose of used batteries immediately.
• Always dispose of batteries properly.
• Always replace the entire set of batteries at one time.
• Never mix old and new batteries, or batteries of different brands or types.
• Do not mix different types (alkaline, standard, or rechargeable).
• Keep batteries out of reach of children.
• Remove batteries when the Bouncer/Rocker is not in use for long periods of time.
• Never leave exhausted batteries in the unit.
• Never try to recharge non-rechargeable batteries.
19
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Battery Installation
Vibration Function
10
Batteries
Remove the battery cover
using a Philips screwdriver
(Fig. 10a).
Install the three AAA
batteries (Fig. 10b).
Replace the battery
cover. Do not overtighten
the screw (Fig. 10c).
VIBRATION UNIT
To use the vibration
function: Slide the oval
button to turn ON and OFF.
NOTE: The wave lines
indicate on and circle
indicates off.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
FUNCTIONS
Fig. 10b
Fig. 10a
Fig. 10c
Vibration ON/OFF switch
20