Baby Trend SMART STEPS RK02A Serie Manual De Instrucciones página 7

ASSEMBLY
Complete the padding cover
by gently stretching the top
covering over the backrest
frame (Fig. 3c).
NOTE: Keep buckle straps
over the tubes at all times.
Buckle each corresponding
support straps (Fig. 3d).
Always maintain the straps
buckled during use.
Fig. 3d
9
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
4
Fig. 3c
Base frame attachment
Base Frame Orientation
Diagram
NOTE: refer to the diagram as
a guide for the following base
connections.
Stationary
feet
Base assembly
NOTE: ensure that rubber on
tube matches same side as
flip-out stationary feet.
Facing down Insert each tube
end with the hole into the
Base frame (back) part with
the tab until they click
(Fig. 4a).
NOTE: ensure that rubber on
tube matches same side as flip-
out stationary feet.
Facing down Insert each
opposite tube ends with the
into the Base frame (front)
firmly until they lock (Fig. 4b).
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Base frame
back
Base frame Base frame
tubes front
Fig. 4a
Fig. 4b
10