Descargar Imprimir esta página

Silk’n SONICSMILE PLUS DCA03 Manual De Usuario página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
1. Place the product on the charging cradle
Make sure the protrusion on the charging cradle fits inside the
hole at the bottom of the product for charging.
2. Plug the USB cable
USB power source (e.g. a USB power adapter) for charging.
Charging starts automatically. The indicator light
green during charging (see Fig. B).
3. When charging is done, the indicator light stops flashing and
stays green. Unplug the USB cable from the USB power
source.
6 Operation
• The product is equipped with 5 modes: "Clean",
"White", "Sensitive", "Polish" and "Massage". When
using the product for the first time, start with the
"Clean" mode before changing to other modes.
• The product remembers your last selected mode for
your next use.
6.1 Cleaning your teeth
1. Attach the brush head
"Replacing the brush head").
Clean the brush head before first use as described in the
chapter "Cleaning".
2. Hold the brush head under running water for a moment to
make it wet.
3. Apply toothpaste to the brush head.
4. Carefully move the brush head up to your teeth.
5. Press the operation button
The product is now switched on in the "Clean" mode. It is
suitable for daily teeth cleaning.
The indicator light
6. Within 5 seconds, press the operation button a second time.
The product is now in the "White" mode. It is suitable for
removing stains and whitening teeth.
The indicator light illuminates green in this mode.
7. Within 5 seconds, press the operation button a third time.
The product is now in the "Sensitive" mode. It is suitable for a
gentle yet thorough cleaning of sensitive teeth and gums.
The indicator light illuminates yellow in this mode.
into the USB port of a compatible
5
to the product (see chapter
1
once.
2
illuminates white in this mode.
3
(see Fig. B).
4
flashes
3
EN
12

Publicidad

loading