Front Runner FAMG001 Instrucciones De Montaje página 4

2
FIT AND SECURE
2.4
2.5
2.6
FAMG001_REV_A00
4
Remove the protective backing of the Foam
Gasket (Item 17) and adhere the Gasket to
the bottom of each foot as shown.
Before mounting the Foot Rail to the vehicle,
insert a T-Bolt (Item 16) in each of the roof
inserts as shown in 2.5.
Insert the T-Bolt and turn it clockwise 90
degrees.
Use the slot on the top of the bolt as a visual
guide.
Secure the Foot Rails to the vehicle by
placing them over the T-Bolts and fastening
using M6 x 12 x 1SS Flat Washers and M6
Nyloc Nuts (Items 5 & 6) as shown.
10mm
Make sure the T Bolt remains in the correct
orientation while tightening.
See detail A in 2.5.
Place a M6 Nut Cap over each of the Nyloc
Nuts.
4 © 2019 FRONT RUNNER VEHICLE OUTFITTERS