Front Runner FAMG001 Instrucciones De Montaje página 5

3
FIT AND SECURE
3.1
Half Rack
3.2
Full Rack
3.3
3.4
Center the rack and tighten fully. Use M8 nut caps (Item 11) to finish off the nuts.
FAMG001_REV_A00
4
Make sure that the wind deflector is installed
before you proceed to the next step.
Refer to Rack Fitment Guide.
Fit your Roof Rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 8, 9 & 10).
13mm
Fit your Roof Rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 8, 9 & 10).
13mm
5 © 2019 FRONT RUNNER VEHICLE OUTFITTERS