Publicidad
Idiomas disponibles
Idiomas disponibles
a
Quick start guide
Vacuum cleaner
For more information see the extended manual
online: ned.is/vcbg550bu
Intended use
This device is exclusively intended as a vacuum cleaner for indoor use.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image B)
1
Bent end
2
Dust bag full indicator
3
Front cover
4
Tube
5
Air outlet grid
6
Air outlet filter
7
Power button
8
Power cable
9
Floor brush
10
Suction hole
Safety instructions
-
WARNING
Only use the product as described in this manual.
•
Do not use the product if a part is damaged or defective.
•
Replace a damaged or defective device immediately.
This product can be used by children aged from 8 years and
•
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
Do not immerse the product in water.
•
Do not unplug the product by pulling on the cable. Always
•
grasp the plug and pull.
Do not use the power cable to carry the device.
•
Do not pull the power cable over sharp edges.
•
•
Do not close a door on the power cable.
Do not put any objects into openings. Do not use with any
•
opening blocked. Keep free of dust, lint hair etc.
•
Keep hair, loose clothing, fingers and all body parts away from
openings and moving parts.
Do not vacuum hard or sharp objects such as glass nails, screws,
•
coins etc.
Do not vacuum hot coals, cigarettes, matches or any hot
•
smoking or burning objects.
•
Do not use without filters in place.
•
Turn off all controls before plugging or unplugging vacuum
cleaner.
VCBG550BU_MAN_COMP_0919_print_(19389 1422)_v02.indd 6
VCBG550BU
11
Hose
12
Dust bag holder
13
Motor filter
14
Motor filter grid
15
Suction control switch
16
Rewind button
17
Dust bag
18
Accessory holder
19
Accessory nozzles
•
Use extra care when vacuuming on stairs.
Do not vacuum flammable or combustible materials (lighter fluid,
•
gasoline, etc.) or use in the presence of explosive liquids or vapor.
•
Do not vacuum toxic material (chlorine bleach, ammonia, drain
cleaner, etc.)
Do not use in an enclosed space filled with vapors given off by
•
oil-based paints, paint thinner, moth proofing, flammable dust,
or other explosive or toxic vapors.
Always unplug the appliance before connecting or
•
disconnecting vacuum hose. Do not allow plug to whip when
rewinding.
Only use on dry, indoor surfaces.
•
Store your appliance indoor in a cool, dry area.
•
•
Keep the end of the hose, wands and other openings away from
your face and body.
Do not use the cleaner to clean your pets or any animal.
•
•
Keep the head (eyes, ear, mouth, etc.) away from the openings,
when the cleaner is working or plugging.
If you hear a squeaking sound and suction power is reduced,
•
unplug the device and clear of blockages and clean the air filter.
Prepare the vacuum cleaner (image B)
w
1. Insert the end of A
into A
4
w
2. Attach A
to A
by fitting it into A
9
3. Fit A
or the desired nozzle A
Use the vacuum cleaner
4
Always remove the power plug from the power outlet before
assembling or removing accessories.
4
When unwinding, guide the power cable with your free hand to
ensure it does not whip, cause damage or injury.
4
There are two marks on the power cable.
The yellow mark shows the ideal cable length.
•
The red mark shows the maximum cable length.
•
8
1. Unwind A
and plug it into a power outlet.
7
2. Use A
to switch on the device.
3. The suction power can be adjusted with A
7
4. Use A
to switch off the device.
8
5. Unplug A
from the power outlet after use.
8
u
6. To rewind A
, press A
4
The product will switch off automatically when overheating.
In case of overheating, follow these steps:
1. Use the power button to switch off the device. Unplug the
power cable from the power oulet.
2. Change the dust bag and clean the filters.
3. Allow the product to cool down for approximately 1 hour before
using again.
Changing dust bag (image C)
4
The dust bag should be changed as soon as the dust bag full
2
indicator A
shows it is full. Additional dust bags are not
included.
3
1. Open A
.
e
2. Take out A
.
6
q
until it snaps in position.
1
.
p
4
to A
.
y
.
.
19-9-2019 15:55:43
Publicidad
