Publicidad
Idiomas disponibles
Idiomas disponibles
5. Slide the upper handle frame assembly into lower handle
frame assembly, then depress the small buttons at the
ends of the lower handle frame, push and insert into upper
handle until it snaps securely into place (Fig. 4).
Fig. 4
Lower handle
frame assembly
6. Fit the stainless steel lance into the trigger gun and rotate
the collar until the two parts are completely locked (Fig. 5).
Fig. 5
Trigger gun
Spray lance
7. Insert the connecting hose into the opening on the hose
reel, as shown, until it clicks securely in place (Fig. 6).
Fig. 6
Opening
Connecting hose
8. Connect the other end of the connecting hose to the
Fig. 7
Upper
handle
frame
assembly
9. Connect the high-pressure hose to the trigger gun (Fig. 8).
Fig. 8
Collar
m
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
10. Thread your garden hose (male end) into the garden
8
water outlet (Fig. 7).
High-pressure hose
WARNING!
Keep hose away from sharp objects.
hose adapter (Fig. 9). The garden hose must have an
internal diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
Water outlet
Connecting hose
Trigger gun
Publicidad
