omi ED Serie Manual Del Operador página 12

6.1 Icons description
ICON
6.2 Signalling Led description
SIMBOL
6.3 Buttons function
Single buttons function
SYMBOL
Activates or deactivates unit operation when pressed for 3 seconds (ON/OFF).
When deactivated, the OFF message is displayed.
When the dryer is switched off using this button all digital outputs are disconnected.
Allows entry the "Functions Menu"
Pressed during normal operation displays the compressor oil temperature.
When pressed during programming mode, it scrolls the parameters list or increases the displayed value.
Pressed during normal operating displays the refrigerant circuit suction pressure.
When pressed during programming mode, it scrolls the parameters list or decreases the displayed value.
Pushed and released shows on display the SET POINT value.
In programming mode selects a parameter or confirms a value.
When pressed for more than 3 seconds during the normal operating, it performs a test of the condensate
discharge valve. (Not used with no loss discharger)
Buttons combinations
Cod. 710.0152.01.01 Rev01 – 05.2012
DESCRIPTION
High / Low refrigerant discharge pressure Alarm (HP/LP)
Icon ON shows "Celsius degrees"
Icon OFF shows "Fahrenheit degrees"
Refrigerant compressor energized
(Blinking when start refrigerant compressor delay activated)
Suggested Maintenance
(Icon connected to CO14 parameter)
"Functions menu" activated
Icon connected to time parameters
(ON when in Functions or Programmation area)
STATUS
ON
ON
(Not used with no loss discharger)
Enters the PARAMETER PROGRAMMING MENU
Exits the PARAMETER PROGRAMMING MENU
Generic Alarm
DESCRIPTION
Dryer energized
Condensate drain energie
DESCRIPTION
BUTTON
LED /
ICON
8 - 114