Perel LEDA3001RGB Manual Del Usuario página 9

 If the protective glass [3] is damaged, disconnect the lamp
immediately from the mains. Have it repaired immediately by a
qualified technician. Do not use the lamp with a cracked or broken
protective glass.
 This luminaire does not have a built-in device to disconnect it from
the electric mains. Make sure to electrically isolate the luminaire
before installation or maintenance activities are performed.
 Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
 There are no user-serviceable parts.
 Contact your dealer for spare parts if necessary.
9. Technical Specifications
body colour
electrical data
power LED module
total nominal power
nominal voltage driver
nominal voltage LED module
red
green
blue
power factor
energy consumption
cable
light technical data
colour
colour temperature
beam angle
luminous intensity
luminous flux
colour rendering index
starting time
warm-up time (60 %)
lifespan
nominal life time
number of switching cycles
V. 03 – 12/11/2015
LEDA3001RGB
grey
1 * 10 W RGB COB LED
10 W
230 VAC
6.5 V
9.6 V
9.4 V
0.45
10 kWh/1000 h
H05RN-F 3G1.0 - 30 cm
RGB
N.A.
100°
- cd
240 lm (white)
N.A.
< 0.5 s
< 1 s
30 000 h
15 000
9 ©Velleman nv