6. Once cleaned and drained, reinstall the oil filter (6), placing also the cover
and clips.
8.3 Spark plug maintenance.
Recommended spark plugs: TORCH E6RTC, NGK BPR6HS or similar references.
1. Open the access cover for the spark plug (1).
2. Remove the cap of spark plug (4), pulling it out.
3. With a spark plug wrench unscrew (2) and remove the spark plug (3) from
the engine (turn counterclockwise).
4. Visually check the spark plug. If the spark plug insulation is cracked or
chipped, replace it with a new one. To clean dirt on the electrode, use a
very thin wire brush.
52