Telcoma Automations E224 Manual De Instrucciones página 38

GB
INSTRUCTIONS FOR INSTALLATION AND PROGRAMMING
- This handbook is aimed at qualified technical installation personnel
- Carefully read all instructions in this handbook before installation.
- Improper use of the product or incorrect connections could impair correct operation of the unit and safety of the final user.
FEATURES
This control unit is designed for the automation of:
- two-leaf gates with or without limit switches
- single leaf gates with or without limit switches
- double leaf sliding gates with limit switches
- single leaf sliding gates with limit switches
The control unit is equipped with:
- encoder and/or current sensitivity motor control
- programmable motor deceleration
- soft start
- photocell operation check (Photo Test)
- self-diagnostics of motor drives (MOSFET)
- connectors for OC receivers and/or BOARD receivers
TECHNICAL DATA
Electrical parameters
Power supply
Frequency
Absorption on stand-by (230V)
Maximum absorption (230V)
Max. motor output 24V
operating temperature
Box dimensions (L x H x D)
38
U.M.
Vac
Hz
mA
A
VA
°C
mm
E224
230 ±10%
50/60
18 / 25 min / max
2
360 (2X180)
-20 +60
220x280x120