Publicidad
Idiomas disponibles
Idiomas disponibles
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will do
the job better and more safely at the rate that it
was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source be-
fore making any adjustments, changing acces-
sories or storing the tool. This preventive safety
measures reduce the risk of accidental starting
of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE: Tool service must be performed only
by qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
WARNING: If the power cord has been dam-
aged, it must only be replaced by trained per-
sonnel in the service centers authorized by Ur-
rea Herramientas Profesionales S.A. de C.V.
IMPORTANT: Any use that deviated from the
instructions indicated in this manual is considered
unauthorized use which invalidates the warranty
and releases Urrea Herramientas Profesionales
S.A. de C.V. from legal responsibilities.
E N G L I S H •
SPECIFIC SAFETY RULES FOR
SUBMERSIBLE PUMP
· This pump is designed for pumping clean neu-
tral liquids, at temperatures not exceeding 35°C.
WARNING: The water pump must not be
used when people or animals are in the water
· It must not be used for the drinking water sup-
ply or for the delivery of foodstuffs.
· Explosive, flammable, aggressive or health-
hazardous substances and faecal matter must
not be pumped.
· This product must not be exposed to dripping
or splashing liquids.
· The appliance is not suitable for continuous
running (e.g. permanent circulation in filter
systems).
· It is also not suitable for use with liquids con-
taining abrasive materials (e.g. sand) or contain-
ing mixtures of dirt, sand, mud or clay.
· Any other use is considered improper. Unpre-
dictable damage can occur as a result of improp-
er use, modifications to the appliance or due to
the use of parts which have not been tested and
approved by the manufacturer.
· The connection must be made to earthed sock-
ets which have been properly installed, earthed
and tested. Mains voltage and fuse must comply
with the technical data.
· Do not kink, crush, drag or drive over the mains
cable; protect against sharp edges, oil and heat.
· During operation for swimming pools, garden
ponds and similar places, the appliance must be
equipped with a residual current circuit breaker
(RCCB) with a design fault current of not more
than 30 mA.
· Disconnect the mains plug before all work on
the appliance .
· Do not install and switch on the appliance if
there are people or animals in the medium be-
ing pumped, or they are in contact with it.
· If repairs are carried out incorrectly, there is a
danger of liquid penetrating into the electrical
components of the appliance.
FEATURES
KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1. TERMINAL COVER.
2. INLET.
3. OUTLET.
4. PRIME SCREW.
5. FAN COVER.
6. IMPELLER CASING.
Us er's Manual
11
Publicidad
