Metra 99-7356B Instrucciones De Instalación página 2

1. Unsnap and remove the small trim
below the climate controls, then
remove one Phillips screw from the
radio trim panel. (Figure A)
2. Unsnap and remove the radio trim
panel. (Figure B)
3. Remove the panel clips from the
factory radio, save them for the
kit assembly.
4. Unscrew the factory hazard button,
save it for the kit assembly.
5. Remove four Phillips screws to
remove the factory radio.
Continue to kit assembly
Dash Disassembly
(Figure A)
99-7356B
(Figure B)
2