Amprobe TR100 Manual De Uso página 10

9. Click to select the channel for the alarm (Temperature or Humidity)
10. Click to set low and high limits for the alarm
11. Click to start the recording or the logging
12. Click to exit the program
13. Click for help
Downloading
To download a recording session, click on Visualizations of the Download Suite toolbar.
SpECIFICATIoNS
Description
Temperature range
Humidity range
Accuracy:
Temperature
Relative Humidity
Sample points
Resolution:
Temperature
Relative Humidity
LeD response
LCD Display
Dimension
Housing
TRoUBLESHooTINg
Cannot connect and the display won't turn on
Ans: Make sure you have selected the correct baud rate. Select 9600 baud rate for all models.
Meter is programmed as Magnetic but could not start
Ans: Set up Magnet start in the Download Suite software. Use a magnet on the rear side of
the meter for more than 2 seconds, the logger should be activated and the ReC flashes. if not,
change a new and stronger magnet and try it again.
TR100
-40 to 85°C(-40 to 185°f)
n/A
± 0.6°C / 1°f (-20 to 50°C / -4 to 122°f),
±1.2°C / 1.2°f all others
n/A
1K / 2K / 4K / 8K / 12k / 16K
0.1°C / 0.1°f
n/A
Red: Hi, Lo Alarm; Yellow: Record
13 x 13 mm
75 x 55 x 23 mm (2.95 x 2.16 x 0.9 in)
ip65
9
TR200
0 to 100 %RH
±3% (25°C, 10-90%),
±5% all others
0.1%
ip54