LG AP551A Serie Manual De Usuario página 11

Installing the Inner Cover and Face Guard
1
Secure the bottom of the inner cover by sliding the holes over the low-
er guide tabs inside the main unit. Arrange the top of the inner cover to fit
within the upper guide tabs as shown.
Guide tab Hole
2
Attach the metal prongs on the back of the face guard to the magnets on
the inside surface of the main unit. Attach the 2 lower prongs first, then
attach the upper prong.
CAUTION
• Do not use the product without the inner cover installed. Without the inner cov-
er installed, sound quality may deteriorate or moisture from your breath could
enter the product.
• If the face guard and the product are not assembled correctly, product perfor-
mance may be affected due to air leakage.
NOTE
• Ensure the product is turned off before installing the inner cover.
Magnet
Metal prong
11