Ikegami IEN-T01P Manual De Instrucciones página 10

7. Setting up a PC
Before connecting a PC to the encoder, modify the IP address and IE (Internet Explorer) set-
tings.
7-1. Setting the IP address
To get the PC interactive with the encoder, first set the PC's IP address to the encoder's IP
address.
(1) To set an IP address, start with the properties of the local area network connection.
Getting the "LAN Connection" properties displayed
Click on the start button first and then on the control panel.
(2) Click on "Network and Internet Connections".
Setting the IP address and Internet Explorer
E-6