Ikegami IEN-T01P Manual De Instrucciones página 12

(6) Click on "Use the following IP address" and enter the address.
* *To return to the original IP address after setting up the encoder, preferably note down the
current IP address.
- Set the IP address at "192.168.1.○" (not 100 for the ○ blank).
- Set the subnet mask at "255.255.255.0".
Initial settings
URL : http://192.168.1.100/
User name : admin
Password : 1
IP address : 192.168.1.100
Subnet mask : 255.255.255.0
Gateway : 192.168.1.1
MTU : 1454
DNS server : 192.168.1.1
HTTP port : 80
HTTPS port : 443
PC operating environment
To display images from this product,
make its settings and maintain it, a PC
meeting the following requirements is
needed.
* Microsoft Windows XP
* Internet Explorer 6.0
* Intel Pentium 4 2.0GHz or higher
* Memory 256MB or higher (512MB or
higher recommended)
E-8