Publicidad
Idiomas disponibles
Idiomas disponibles
STEP
18
Ø3.5X19mm
x2
16
IMPORTANT : THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE TIPPING RESTRAINT KIT PROVIDED WITH THIS PRODUCT:
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall and and mark the wall through the clip (19). Use screw (17) to attach the clip
(19) to the wallboard. Use screw (16) to attach the clip (19) to the top shelf back. Move the furniture to its final position.
Thread the strap (20) through the clip as shown in the illustration, tighten strap until snug. Do NOT over tighten.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the clip (19). Drill 5mm diameter holes (3/16") in
the wallboard. Tap the wall anchor (18) into the hole until it is flush. Use screw (17) to attach the clip (20) to the wallboard.
Use screw (16) to attach the clip (19) to the top shelf back. Move the furniture to its final position. Thread the strap (20)
through the clip as shown in the illustration, tighten strap until snug. Do NOT over tighten.
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket
Option 1:
Stud
Clip
Screw (17)
Furniture
Clip
Screw (16)
ameriwoodhome.com
Ø3.5X38 mm
x2
17
Option 2:
Wall
Clip
Screw (17)
Furniture
Strap
Wall
x2
18
19
27
x2
x1
20
You
Tube
Publicidad
