Publicidad
Idiomas disponibles
Idiomas disponibles
The entire Cooktop can be safey cleaned by wiping with
a soapy sponge, then rinsing and drying. If stubborn soil
remains, follow the recommended cleaning methods below.
CAUTION
• Before cleaning, be certain the burners are turned off and
the grates are cool.
• Always use the mildest cleaner that will do the job.
• Use clean, soft cloths, sponges or paper towels.
• Rub stainless steel finishes in the direction of the grain.
Wipe area dry to avoid water marks.
• Do not clean removable cooktop parts in any selfcleaning
oven.
• After cleaning, place all parts in their proper positions
before using cooktop.
The cleaners recommended below and on the following page
indicate cleaner types and do not constitute an endorsement of
a particular brand.
Use all products according to package directions.
Cooktop Part / Material Suggested Cleaners
Parts and materials
Burner base
(Cast aluminium)
Gas spreader
(Cast aluminium)
Gas spreader
(Brass)
Suggested cleaners
Damp cloth.
• Detergent and hot water; rinse and dry.
• Stiff nylon bristle-toothbrush to clean port
openings.
Abrasive cleansers: Revere ware® metal
polish. Following package direction Use
Brillo® or S.O.S.® pads.
Rinse and dry.
Wash them in hot soapy water, rinse, and
dry.
Use a stiff nylon brush or straight-ended
paper clip to clear the notches of a flame
spreader.
5 - Cleaning the Cooktop
Suggestions/Reminders
Keep the gas injector area free of cleaning
agents and any other material from entering
the injector orifice.
Rub lightly, in a circular motion.
Aluminium cleaners may dull the surface.
To clean port opening, use a tooth brush
or straightened paper clip.
Rub lightly, in a circular motion.
Brass cleaners may dull the surface.
To clean port opening, use a tooth brush or
straightened paper clip.
EN
9
Publicidad
