Bestron DC30BC Manual Del Usuario página 47

3. Connect the wiring coming from the down rod to the terminal block on the mounting plate in the following
way (V):
• Blue wire → N
• Brown and black wires → L
1
4. Now lift the fan from the "J-hook", place the fan over the two screws
the screws firmly (W).
5. Insert the two screws
6. Secure the down rod as depicted in figure X.
7. Now, place a lamp type E14 (60 Watts max.) in the lamp socket (see figure Y).
8. Carefully place the glass lamp cover over the three brackets (Z).
The fan has now been installed correctly.
You can now switch the mains power back on.
1
into the mounting plate and tighten them firmly as well (W).
2
Y
W
in the mounting plate and tighten
1
X
47
1
2
Z
EN