Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
5
Flushing the water outlets
and checking for leaks
□
Place the handle (F) on the valve body (D)
inverter and turn the handle (F) to the full on
mixed position. Turn on the hot and cold water
supply lines and allow the water to ow from
the outlets for one minute, or until all foreign
matter has been ushed out. Check for leaks.
□
Shut off the water at the faucet and supply
lines. Remove the handle (F).
D
F
6
Installing the plaster guard
□
Place the plaster guard (L) onto the valve body (D)
and secure with the screws (K).
NOTE: Be sure to position the plaster guard (L) correctly
onto the valve body (D), with the side marked "SHOWER"
facing upward.
K
D
L
9
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.COM
Publicidad
