Glacier bay 67277W-8004 Guía De Instalación Y Cuidado página 5

Installation (continued)
3
Preparing the pop-up assembly
□
Remove the pop up stopper (J), drain ange (K)
and rubber washer (L) from the drain body (O).
□
Screw the lock nut (N) in a counter-clockwise
direction, and push the rubber washer (M)
down.
M
N
O
4
Installing the drain body
□
Place the drain ange (K) into the drain hole
of the sink, make sure the rubber washer (L)
under the drain ange (K).
□
From underneath the sink, screw the drain
body (O) onto the drain ange (K). Ensure that
the opening (1) for the ball rod on the drain
body (O) faces towards the rear of the sink.
□
Screw the lock nut (N) in a clockwise direction,
and push the rubber washer (M) up to tighten
the drain body (O). Do not overtighten.
J
K
L
5
Please contact 1-855-HD-GLACIER for further assistance.
1
M
N
O
K
L
1
HOMEDEPOT.COM