• If the connecting cable is damaged, it may only be replaced by
the manufacturer, its service organisation or similarly qualified
persons, in order to prevent hazardous situations.
• The electrical connection must meet national and local regulations.
• The socket and plug must always be within reach.
• The appliance may not be connected to the mains supply via
a power strip or extension cord. If this is not observed, the safety
of the appliance cannot be guaranteed.
• The appliance must always be earthed.
• The worktop on which the induction hob is placed must be flat.
• The walls and the worktop around the appliance must be heat-
resistant to at least 90°C. Even if the appliance itself does not get
hot, the heat of a hot pan could discolour or deform the wall.
• WARNING: When cooking on the hob, the process must always
be monitored. A short cooking or baking process should be
monitored continuously.
EN - 14