Overview; 1 Transmitter Siem-111T (Figs 1 And 2) - Monacor International JTS SIEM-111/5 Manual De Instrucciones

Contents
1 Overview
1 1 Transmitter SIEM-111T (figs 1 and 2)
1 2 Receiver SIEM-111 / R5, earphones IE-1
(fig 3)
1 3 Display on the receiver (fig 4)
1 4 Display on the transmitter (fig 5)
2 Safety Notes
3 Applications
3 1 Conformity and approval
4 Before Operation
4 1 Setting up the transmitter
4 2 Connecting the transmitter
4 3 Power supply of the receiver
4 4 Connecting the Earphones
4 5 Selecting the transmission frequency
and the received frequency
4 5 1 Adjusting the frequency on the receiver
4 5 2 Adjusting the frequency
on the transmitter
5 Operation
5 1 Adjusting the input level on the transmitter 17
5 2 Monitoring the transmitter via headphones 17
5 3 Inserting the earphones
5 4 Adjusting the volume and the balance
5 5 Further optional features of the receiver
5 5 1 Menu item "Stereo / Mono"
5 5 2 Menu item "Hi Freq Boost"
5 5 3 Menu item "Limiter"
5 5 4 Menu item "Key lock"
5 5 5 Menu item "Contrast"
5 5 6 Menu item "Light time"
5 6 Fastening the receiver
5 7 Further optional features of the transmitter 18
5 7 1 Operating mode MONO / STEREO
5 7 2 "LOCK" function
5 8 Switching off the units
6 Specifications
12
In-Ear Monitoring System
These instructions are intended for users without
12
any specific technical knowledge Please read the
12
instructions carefully prior to operation and keep
them for later reference
All operating elements and connections de-
13
scribed can be found on the fold-out page 3
13
1

Overview

13
1.1 Transmitter SIEM-111T
14
1 POWER button
14
2 LC display (
☞
14
3 Button + for switching over a function or for
15
increas ing a value in the adjusting menu; when
the button is kept pressed, the value will increase
15
continu ously
15
4 Button SET for calling the adjusting menu, for
se lecting the menu item and for confirming the
15
adjustments made
15
5 Button − for switching over a function or for
decreas ing a value in the adjusting menu; when
the button is kept pressed, the value will decrease
16
continu ously
16
6 VOLUME control for adjusting the input level
7 Volume control MONITOR for headphones con-
16
nected to the jack (8) or (9)
8 3 5 mm jack
17
(impedance 2 × ≥ 16 Ω)
9 6 3 mm jack
phones (impedance 2 × ≥ 16 Ω)
10 Mains input jack for connection to 100 - 240 V (~)
17
via the mains cable supplied
17
11 Fuse holder; always replace a blown fuse by one
of the same type!
17
12 Feed-through output LOOP OUT for channel
18
CH 1 for routing the input signal at the jack LEFT /
18
CH 1 IN (14) to the input of another audio unit,
e g an other transmitter
18
13 Feed-through output LOOP OUT for channel
18
CH 2 for routing the input signal at the jack
RIGHT / CH 2 IN (15) to the input of another audio
18
unit, e g another transmitter
18
14 Combined XLR / 6 3 mm jack LEFT / CH 1 IN for
18
balanced connection of the left channel of a
stereo signal source (e g mixer, CD player) or a
mono signal source
18
15 Combined XLR/6 3 mm jack RIGHT / CH 2 IN for
balanced connection of the right channel of a
19
ster eo signal source (e g mixer, CD player) or a
19
mono signal source
19 16 BNC jack for the antenna supplied
(figs 1 and 2)
chapter 1 4)
for connecting stereo headphones
for connecting stereo head-