EarthWise HT10218 Manual Del Propietário página 6

If you drop the trimmer, carefully inspect it for damage. If the blade
is bent or cracked, handles broken or if you see any other condition
that may affect the trimmer's operation, it must be repaired before
putting it back into use. Call our customer service help line at
1-800-633-1501 for assistance.
CAUTION: Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating oils, etc., come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy
plastic.
Make sure the unit is detached from the power supply, then use only
mild soap and a damp cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by a
qualified individual using only identical replacement parts.
Problem
−
Unit does not run
−
Slow running, noisy or hot blades
For parts or service, please call 1-800-633-1501 or visit us online at www.americanlawnmower.com. Be
sure to provide all relevant information when you call or visit.
REPAIR PARTS (KITS/ ITEMS)
The model number of this tool is found on a plate or label attached to the housing. Please record the serial
number in the space provided below.
MODEL NUMBER
SERIAL NUMBER_______________
at 1.800.633.1501 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time, or get assistance on
MAINTENANCE
TROUBLE SHOOTING
Possible Cause
−
Extension cord not connected to
the plug
−
Cord not connected to power
source
−
Trigger switch not fully operated
−
Dry, corroded blades
−
Blades or blade support bent
−
Bent or damaged teeth
−
Loose blade bolts
HT10218 ___
Call us first with questions about operating or maintaining your product
www.americanlawnmower.com.
The cutting blades are made from high quality, hardened steel and
with normal usage, they will not require re-sharpening. However, if
you accidentally hit a wire fence, stones, glass or other hard objects,
you may put a nick in the blade. There is no need to remove this
nick as long as it doesn't interfere with the movement of the blade.
If it does interfere, make sure the unit is detached from the power
supply and use a fine toothed file or sharpening stone to remove the
nick.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the tool
on or adjacent to fertilizers or chemicals.
LUBRICATE BLADES - Stop
the unit and disconnect the
power cord. Then remove any
debris on blades. Apply a
light machine oil along the
edge of the top and bottom
blade supports. Make sure
handles remain clean and
dry.
−
Check extension cord is fully connected to tool
−
Check extension cord is fully connected to a live receptacle
−
Check that safety lock of button is fully forward prior to moving
trigger
−
Lubricate blades
−
Straighten blade or blade support
−
Straighten teeth
−
Tighten blade bolts
CALL US FIRST !!
6
Model HT10218
Possible Solution