Istructions; Preparation; Starting Of Machine - STI GAISER 18000 Manual De Uso Y De Mantenimiento

6. ISTRUCTIONS

6.1 Preparation

•
Open the cap 10 and fill the cold water tank with tap water.
•
Connect the plug to a socket on a patchboard provided with a switch with an efficient earth
connection.
The appliance is provided with a power cord according to its electrical input
characteristics. It's important to verify that the electrical mains are according to the
norms. It is recommended that the power supply of this appliance includes a differential
switch of 30 mA maximum.

6.2 Starting of machine

•
Switch on the main switch 1 to start the machine.
•
The indicator light 4 goes on.
•
When the pump has filled up the boiler and stops, the machine starts heating up (about 6 minutes).
•
When the indicator light 7 goes on the appliance is ready for use.
•
Connect the steam hose to the socket 2, making sure that it is inserted correctly.
•
Push the steam button on the handle and direct the steam jet towards the area which has to be
cleaned.
•
To start the detergent function, push the switch (12) on the control panel and the switch (14) on the
handle of the lance
Before starting steam cleaning, blow off the initial condensation in the conducts
in a bucket or any other suitable place.
14