Vollrath HPI4-2600 Manual Del Operador página 11

REPLACE THE FUSE
The Troubleshooting section of this manual describes situations in
which the fuse may need to be replaced.
Tools You Will Need
• Small screw driver
• Towel or soft cloth
• 314 20A fuse (Available on Vollrath.com and found at most
hardware stores)
1. Turn off and unplug the induction range.
2. Place a towel or soft cloth on a flat, stable surface.
3. Gently and carefully, lay the induction range, glass-side down, onto
the towel. Locate the fuse cap.
4. Using screwdriver; press down and turn the fuse holder cap to
release it from the range.
5. Remove the fuse from the holder.
6. Insert a replacement fuse into the holder.
7. Re-insert the holder and use the screwdriver to secure the cap into
the range.
8. Ensure the cap holder is locked into place.
High Power Countertop Induction Ranges with Temperature Control Probe Operator's Manual 11