Publicidad
Fig.1
a. Insert the 38*38 Plug(#22) into the part(#2, #4). Set theφ19 End Cap(#20) onto the part(#2).
b. Attach the part(#2) to the part(#5) using (4)M10*55 Hex Bolts(#35)
c. Attach the part(#1) to the part(#5) using (2)M10*55 Hex Bolts(#35).
d. Attach the part(#4) to the part(#1) using (2)M10*20 Hex Bolts(#34).
FYTTER |WWW.FYTTER.COM
PAG- 12
Publicidad
