Publicidad
Idiomas disponibles
Idiomas disponibles
3.
TECHNICAL SPECIFICATIONS
Input
Output
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Dimension (without battery adaptor)
Weight (without battery adaptor)
Regulatory Approvals
Water Resistant
4.
BATTERY CHARGING INSTRUCTIONS
Place the charger on a stable surface. Plug the output connector of the external AC/DC
power supply into the DC input located on the rear of the charging station. Then plug
the external AC/DC power supply into an AC outlet.
The charge process will start after inserting a battery pack into the slot after a battery
recognition and initialization. Leave the battery in the slot until the indicator light turns
green. The battery is fully charged and is ready for use. See Table 1 for a legend of the
LED indicator.
1
LIT 233
®
CUDA
Surgical
(English)
Item
Figure 1. 3736- series Charger
Specification
19 - 26V
2.8A max
0-17.4V
4.8A max
32⁰F to 104⁰F (0⁰C to 40⁰C)
14⁰F to 158⁰F (-10⁰C to 70⁰C)
10% to 90%
5% to 95%
(LxWxH) 4.7in x 2.5in x 1.7in
0.24lbs
UL listed and CE
Not Protected Equipment, IPX0
Date of Revision:01/26/18
Rev. -
Page 4 of 31
Publicidad
