Publicidad
Idiomas disponibles
Idiomas disponibles
EN
SAFETY RULES
· Before connecting the appliance to the mains power supply,ensure it corresponds to the
voltage specified on the label on machine bottom side.
· Never lean the appliance on an unstable surface, always use a firm ironing board or trolley.
TURBO steamer is equipped with wheels and needs to be leaned on the ground.
. Connect the appliance to a grounded socket only.
· Never leave iron and steamer unattended while connected with the mains power supply.
· Never unscrew the boiler cap (8) while the appliance is connected with the mains power supply.
· While unscrewing the cap and using the iron, be CAREFUL not to direct the residual steam jet
towards hands or body.
· Do not use the appliance in case of damage of any kind.
· Do not expose the product to harmful weather conditions, such as rain, humidity, frost, etc.,
keep in a dry place.
· Never submerge machines, irons or steamer hose (20) into water or other liquids.
. Completely unwind the power supply cable (5) and single-pipe (11) before starting ironing.
· If multiple-sockets, extensions, adapters, etc. are used, only use those ones complying with
the safety standards in force. In any case, never exceed the absorption limits shown on adapters,
extensions, etc., as well as maximum power limit specified on the multiple adapter. Ensure they
are grounded.
Some parts of the iron and the boiler have been lubricated in manufacturing phase, thus slight
smoke emissions could occur during the first operating hours. This phenomenon shall disappear
after a short use.
· Do not handle nor touch the product with wet hands or barefoot.
· Keep the appliance out of reach of children or persons with limited mental, sensory or physical
skills and act so that they cannot pull the power supply cable (5 ) or the single-pipe (11).
· Before stowing the machine after ironing or cleaning, wait for its cooling down.
· Do not take the power supply cable to hot or sharp surfaces or objects.
· Put the iron on the relevant mat (16) when going away also for a moment.
· Always put the hot iron on the relevant mat (16). Never put the hot iron on single-pipe (11) or
power supply cable (5).
· Fill in the boiler by using the funnel (9) delivered with the machine to prevent any water leak.
USE THE FUNNEL WITH COLD MACHINE.
· Let the boiler cool down before filling it, otherwise steam and hot water drop could leak and
melt the plastic funnel used for filling. Do not pour perfumes or other detergents into the boiler.
Publicidad
