Michelini Easy Jet A-8EJ Manual De Uso Y Mantenimiento página 21

EN
TROUBLESHOOTING
NO STEAM GETS OUT OF IRON OR CLEANING ACCESSORIES
Ensure that steam adjustment knob (12), if any, is open. Otherwise, in the summer, it is possible
that steam getting out does not saturate air, thus it is apparently dry and invisible; to ensure
proper operation, direct the jet to a cold surface; drop condensation indicates proper operation.
WATER LEAKS FROM IRON
Check that temperature regulator (15) on iron is in linen-cotton-wood steam position. It may
occur after keeping the iron button pressed for too long. Ensure that the water quantity
inside the boiler does not exceed the steam specified on machine label. If the problem persists,
contact the closest Authorised Technical Support Centre.
THE STEAM-READY PILOT LIGHT (3) REMAINS ON
Switch the machine off and let it cool down. If the pilot light is still on when switching the
machine on again, the protection fuse has been activated; switch the machine off and contact
the closest Authorised Technical Support Centre.
THE CAP (8) BLEEDS
It is possible that, while water gets exhausted inside the boiler, the cap (8) eliminates the
pressure in excess; it is a normal process. If the problem persists (also with boiler full), contact
the closest Authorised Technical Support Centre.
STEAM SPOTS CLOTHS AND/OR THERE ARE DROPS ON TABLE PLATE
Check that iron temperature is high, i.e. set up on linen, cotton or wool; really, at lower
temperatures, the iron can emit drops possibly spotting fabrics. Check the ironing board.
Really, the board absorbs and keeps steam; it is possible that the ironing table coating cloth is
not suitable or the ironing table is inadequate to the professional iron and keeps excessive
humidity. If the problem persists, contact the closest Authorised Technical Support Centre.
(MULTIFUNZIONE TURBO MOD.) WATER LEAKS FROM QUICK CONNECTIONS
Sealing gaskets are likely to be lubricated Perform this operation as specified in MAINTENANCE
chapter.
THE MACHINE PROVOKES THE RELEASE OF ON-OFF SWITCH
Check that the total power in Watts of household appliances operated does not exceed the
power delivered by the Provider. If the power available is not known, read it on the Provider's
invoice. If the problem persists, contact the closest Authorised Technical Support Centre.