Publicidad
STEP 13
Fold back panels as shown.
Attached the back panels as shown by nailing straight into the raw edges.
Using six screws (5), screw back panels lip to bottom of top (E).
Accrue that the unit is square. Distance from corner to corner must be equal.
This section will be screwed into top.
Distance from corner to
corner must be equal.
5
5
ameriwoodhome.com
7
(x24)
#A21110
This section will be nailed into raw edges
5
O
5
IMPORTANT! THE BACK PANEL IS A STRUCTURAL
PART OF THIS UNIT AND MUST BE INSTALLED
PROPERLY.
(x6)
#A12120
5
E
F
Make sure edge of back panel is flush
with bottom edge of the bottom.
20
5
5
O
7
Publicidad
